HD Portable Vehicle Lifts
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Customer is responsible for unloading freight items from the delivery truck. Special delivery requests must be addressed prior to delivery and extra costs may be incurred for special delivery options.
|
|
|
Equipment Financing Link Click Here
PCL-16HD Portable Column Lift
PCL-16HD (4-Columns) for $23,940.00 Delivered
Model: PCL-16HD
This Heavy-Duty portable column lift system has a lifting capacity of 66,000 pounds and achieves its maximum lifting height of 70 inches in just over a single minute!
-
16,500-pound column capacity
-
66,000-pounds maximum system capacity (using 4-columns)
-
Three separate modes of operation – single, pair or all-four
-
70” maximum lifting height for "Tall Mechanics"
Description
Whether you need to lift a bus, fleet vehicle or fire truck, BendPak’s
PCL-16HD lift system is designed to meet your needs. This super-duty
mobile column lift system has a combined lifting capacity of 66,000-pounds
and reaches a maximum lifting height of 70” in just over one minute.
Each lift column features a mechanical locking system, flow control check valve, pressure relief valve and trouble-free hydraulics for increased safety and reliability.
A unique hydraulic control system allows operators
to lower the columns manually in the event of a power supply failure.
Microprocessor controls combined with a unique hydraulic
synchronization system ensures very smooth movement over the entire
journey; from floor, to maximum lifting height and back.
A hydraulic pallet-truck mechanism, coupled with a tight turning radius, enables one person to move the columns effortlessly.
The PCL-16HD system's controls are easy to use and feature up / down and emergency stop buttons. Includes the added convenience of three separate operation modes: single, pair or all four.
The PCL-16HD-4 is the four-post configuration of the PCL-16HD series.
(If you need a six-post configuration lift so you can lift a Tractor-Trailer combination or similar long heavy vehicle, check out the PCL-16HD-6 and contact us for a quote)
Features
- 16,500-lb. individual column capacity
- 66,000-lb. maximum system capacity
- Three modes of operation: single, pair and all four
- 67" lifting height for tall mechanics
- Extended 15" forks accommodate super-wide tires and deep wheel configurations
- Multi-width wheel forks with locking pins accommodate the widest range of wheels eliminating the need for specialty wheel adapters
- Integrated electronic feature self diagnostics functions
- Independent column control stations eliminate the need for a single master control column
- Trouble-free hydraulic lifting system
- Low power consumption
- Separate key lock security for each control box
- Fuse protected
- Sealed rollers on the wheels for easy movement of the columns
- Sealed roller bearings on carriages for a lifetime of trouble-free service
- Space-saving design and reduced column weight
- A tight turning radius provides easy mobility
- Automatic synchronization and communication between columns for precise, level lifting
- Multiple, automatic, independent safety locks ensure safe operation
- Quick-disconnect plugs at each column for fast and efficient set up
- Simple operation, long service life and minimum maintenance
- Operator monitoring and automatic leveling control
- Set the vehicle on jack stands and use the columns to raise another vehicle in an adjoining bay
- Low-profile fork angle for easy positioning of columns, especially for floatation tires
- Low mounted weight distribution of power unit and controls means a low center of gravity, allowing the columns to move easier than top heavy screw-drive columns
- Durable powder-coat finish
BendPak PCL-16HD Specifications
| PCL-16HD | |
|---|---|
| Maximum Column Capacity | Each Column 16,500 Lbs. |
| Maximum System Capacity / Set of Four | 66,000 Lbs. |
| Min. Column Height | 89" |
| Max. Column Height | 144-3/4" |
| Maximum Lifting Height | 70" |
| Length Lifting Fork | 15" |
| Overall Length / Depth | 47-3/4" |
| Width Inside Lifting Fork / Min. | 11" |
| Width Inside Lifting Fork / Max. | 23-1/2" |
| Overall Width | 43-1/2" |
| Turning Circle | 40" |
| Column Weight | Ea. 549 lbs. |
| Lifting Speed | 110 Seconds |
| Motor / 2 HP | 208 / 230 50/60 Hz, 3 Phase |
The design, material and specifications are subject to change by BendPak without notice.
CHALLENGER LIFT JACK STANDS
CLM-AB-16 Jack Stand
Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 21.5" to 31.5"
Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 31.5" to 41.25"
Short height mobile column automotive lift support stand for 16,000 lb. capacity lifts, adjusts from 51.25" to 78.75"
CLM-AB-18 Jack Stand
Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 21.5" to 31.5"
Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 31.5" to 41.25"
Short height mobile column automotive lift support stand for 18,000 lb. capacity lifts, adjusts from 51.25" to 78.75"
Call Toll Free 866-452-4563
Between 9:00 AM & 5:00 PM Mon. thru Fri.
We have the resources, experience and commitment to provide your company with low-cost Equipment Leasing and Financing solutions. We feel it's most important to take the time to listen to your needs and understand your business goals.
That way we can work together to customize a lease that best help suit your business.
Pinnacle Leasing
720-259-2374 Robin Zimmerman
Crest Capital Equipment Financing
Financing Available For Start-Ups & Established Businesses!
Smitty's Equipment Sales & Service
1705 W. Armitage Court
Addison, IL. 60101
1-630-678-9010
"Proud Accredited Member of the Better Business Bureau"
All logos, names, trademarks and illustrations throughout this site are the property of their respective owners. All the rest Copyright © 2006 by Smitty's Equipment Sales & Service, Division of Blizzard Wizzard's Incorporated