Oil Filter Crushers, Tank Monitors and Tank Gauges

Crushing chamber accepts filters 7 1/2"
tall x 5" diameter.
Only one moving part, a 1 1/2" shaft.
Safety door - crusher will not operate if door
is opened.
Cycle time: 5 seconds.
Air requirement - 125 to 175 PSI.
Air regulator not needed.
Oiler and lubricator not needed.
All parts in contact with air are rust proof.
Size: 30" high, 12" wide, 12" deep.
Lifetime warranty on housing, one year limited on all other parts.
Optional Stand Below
Wall mounting brackets included.
12" Flexible drain hose included.
Crusher weight 95 lbs.
(Shipping weight 106 lbs. Shipped UPS.)
Image shows crusher on stand, which is NOT included with the crusher unit and must be purchased separately.

SEE C-4 DEMO HERE

Click image below for BJC-4 info...

BJTT-12 Pneumatic
Tractor Trailer/Truck
Oil Filter Crusher

SEE TT-12 DEMO HERE

Smitty's Sale Price $3079.00 Delivered

Optional Stand for the C-4 unit is 36" high.
14.5" wide x 16" deep at top. 21" wide x 22" deep at bottom.

Constructed from industrial grade steel.
Designed for use with C-4 and C-6 oil filter crushers. Fully assembled with vibration pads included. 67 lbs. Can be shipped via UPS.

Sale price $298.00 Delivered

BJC-6 Filter Crusher

Smitty's Sale price $1859.00 Delivered

Click image below for BJC-6 Info...

SEE C-6 DEMO HERE

Click for INFO

Stand Included!

Send us our competitors quote and we'll try to save you money!

Large Optional Stand

23" wide x 23" deep x 36" high stand. Constructed from industrial grade steel with a drain shelf for storing uncrushed filters, a 2" N.P.T. drain for piping to other storage vessels. Will accept a 30-gallon drum. The crusher stand can be used with any filter crusher manufactured by BJ Enterprises. Has vibration pads and provisions for securing to the floor. Fully assembled. The weight is 99 lbs. and can be shipped via UPS.

SALE PRICE $479.00 Delivered

BJTT-25EH Electric Hydraulic Tractor Trailer/Truck
Oil Filter Crusher

SEE 25-EH DEMO HERE

Sale price $4229.00 Delivered

Large crushing chamber: accepts filters
up to 16" tall x 9" diameter.
Automatic crushing cycle.
Stand Included.
Cycle time: 1 minute.
Pump: 2HP - 1 Phase - 230Volt.
Safety door - crusher will not operate
if door is opened.
Size: 50" high, 18" wide, 31" deep.
Overall size on stand: 86" high, 23" wide, 31" deep.
Lifetime warranty on housing, one year limited on all other parts.
Crusher with stand shipping weight 530 lbs. Trucked on pallet.)

Shipping To US Locations Only

Customer is responsible for unloading freight items from the delivery truck. Special delivery requests must be addressed prior to delivery and extra costs may be incurred for special delivery options.

Ben Pearson Oil Filter Crushers

Ben Pearson's Crushmaster 1 with or without HD stand

Operates on normal ship compressed air, delivers 13,572 pounds of crushing force with 120 PSI of air pressure. Use for all standard sized oil filters and is designed for high volume use. Solid steel plate construction with built in safety features insures years of safe maintenance-free operation. 5 Year Mfg. Warranty

Can crush up to 4 filters at one time
Can crush up to a 9" tall filter
Crushing chamber door is prevented from opening while in operation.
Heavy duty stand included in this combo
Backed by 5 year Manufacturer's limited warranty & a nationwide service center network and Made In the USA!

CrushMaster 1 for $1859.00 Delivered

CrushMaster 1 with HD Stand $2279.00

DELIVERED!

Ben Pearson's Crushmaster 2 with or without HD stand

Designed for heavy duty use

Electric/Hydraulic Operation

37,500 pounds of crushing force

Crushes filters up to 16" in height

Can crush 4 automotive filters at a time

Heavy duty 4 HP motor

Heavy duty stand is included in this combo deal and is designed with grated top for draining of filters before crushing.

Backed by 5 year Manufacturer's limited warranty & a nationwide service center network and Made In the USA!

CrushMaster 2 for $4220.00 DELIVERED!

CrushMaster 2 with HD Stand $4650.00 DELIVERED!

Smitty's Sale Price $1570.00 Delivered

Model QP-50
Quickpac® Automotive Spin-On Oil Filter Crusher

Remove up to 95% of used oil and crush filters down to 20% of their original size.

Air pressure required for a given crushing force:
12,375-lb .......... 110 psi
13,500-lb .......... 120 psi
14,500-lb .......... 130 psi
15,500-lb .......... 140 psi
16,750-lb .......... 150 psi
18,000-lb .......... 160 psi

Model QP-160
Quickpac® Heavy-Duty Truck Spin-On Oil Filter Crusher

Smitty's Sale Price $2400.00 Delivered

11-Tons of Crushing Force at 200 psi!

100% Air operated...no electrical connections
Mounting stand included...no wall mounting or complicated installation required
No mess...designed to operate clean and efficient
Removable catch basin...for easy cleaning
Crush one 16" tall truck filter or four 9" tall automotive spin-on filters
Interlocking Door...prevents door from being opened while ram is in any other position than fully raised.
Convenient operation...one hand is required to latch the door.
Remove up to 95% of used oil and crush filters down to 20% of their original size.

Air pressure required for a given crushing force:
12,375-lb .......... 110 psi
14,500-lb .......... 130 psi
16,750-lb .......... 150 psi
18,000-lb .......... 160 psi
20,250-lb .......... 180 psi
22,500-lb .......... 200 psi

If You Would Like Additional Information On Any Specific Product Or Part, you can call us at 1-866-452-4563 between 9 AM & 5 PM (central time) Mon. thru Fri. and we will get your Quote to you ASAP

Gauges, Tank Monitors & Pump Shut Off Valves

Tank Gauge SALE!

$59.00 Delivered

Depth Of Tank In Inches

(Specify depth of tank gauge will be used on)

TM3Tank Overflow Monitor

TM3 monitors liquid level and just shuts off air to pump to prevent pump from overfilling tank $335.00 Delivered

JARHEAD Tank Monitor Kit

Avoid Costly overflows or untimely shortages
Supervised System
Low Voltage
Strobe and Siren
Can drive up to 10 solenoid valves
Easy Installation!

$435.00 Delivered!

Specify depth of tank in inches when ordering this kit.

Depth Of Tank In Inches

The 007 Jarhead Tank Monitor is designed for use on most single or double walled aboveground tanks. The 007 is primarily used by the automotive and industrial markets to help prevent costly and unnecessary tank overflows or bulk product shortages for such fluids as oils, waste oils, antifreeze, water and liquids with a low flash point. This three-piece package will monitor either a high or low tank level. It is a low voltage supervised system. When preset float is activated a 103-decibel siren will sound and a strobe light will flash. Control panel is mounted indoors and Jarhead Tank Sensor fits any 2” tank bung opening. Transformer is 12-Volt DC. This unit is engineered to control up to 10 diaphragm pumps and/or electric pumps as well as additional strobes and sirens. Please specify tank depth 18" - 72" when ordering.

007 Tank Monitor Kit

Audible and Visual alarm kit, transformer operated for increased reliability.

(options available below)

No Batteries to Monitor!

$397.00 Delivered

The 007 Tank Monitor is designed for use on most single or double walled aboveground tanks. The 007 is primarily used by the automotive and industrial markets to help prevent costly and unnecessary tank overflows or bulk product shortages for such fluids as oils, waste oils, antifreeze, water and most non-combustible liquids. The 007 is also ideal for monitoring interstitial space as well.

This three-piece package will monitor either a high or low tank level. It is a low voltage supervised system. When preset float is activated a 103-decibel siren will sound and a strobe light will flash. Control panel is mounted indoors and Remote Tank Sensor fits any 2" tank bung opening. Transformer is 12-Volt DC. This unit is engineered to drive up to 10 solenoid valves and additional strobes and sirens. (See chart for limits)

Maximum milliamp load is 750 mA. Do not exceed.

Example: 1 additional Siren + 2 additional Strobe Lights = 610 milliamps

Download 007 Monitor Installation Manual

The optional units below, are controlled by the 007 Tank Monitor shown above...

Optional Air Valve & Transformer

12V Air Valve & Transformer 007SV

For controlling air operated pumps so they won't keep pumping and overflow your waste oil tank.

Works on any size air operated pump.

$275.00 Delivered

Optional Siren

107-Decibel Siren

The low voltage siren is ideal when an audible alarm is needed at a remote location. It can be installed up to 300 Ft. away from the tank monitor using 18-gauge wire.

$69.00 Delivered

Optional Jarhead Sight Gauge

Jarhead Remote Sensor

Additional sensor sight gauge for wall mount Sentry or 007 model.

$89.00 Delivered

Specify Tank Depth When Ordering

Depth Of Tank In Inches

Optional Strobe Light

Visual Signal when 007 is in Alarm

$64.00 Delivered

Optional Remote Tank Sensor

Remote Tank Sensor for 007

$74.00 Delivered

Sentry High or Low Tank Alarm

LOW COST

103 decibel siren

Weather resistant housing

1/2 NPT X 6 " pipe supplied, easily field replaced for adjustable sensor depth from 2 inches to 10 feet

Push button test switch with weather resistant rubber boot

Sentry S1 monitors product level in tank. Battery operated or upgradeable to 12v transformer.

(Can not be used to run accessories like a solenoid operated air shut-off valve for pump. For that type of service see the 007 unit) $198.00 Delivered

Sentry S1Transformer Kit

$35.50 Delivered

Sentry S1 Optional Transformer

For any depth tank up to 99 inches deep.

Black Knight

The Black Knight's Numbers decrease as fluid level lowers indicating how many inches are left until the tank is empty.

$139.00 Delivered

Measures from 99" - 0"

Large number display

Molded housing- Non-corrosive, highly durable.

Direct drive

2" N.P.T. thread

Nickel plated brass chain! won't fray, knot or kink!

Oversized floats with swivel assembly

RED FOX

For any depth tank up to 99 inches deep.

$139.00 DELIVERED

Red Fox units numbers decrease as fluid level rises indicating how many inches are left until the tank is full.

If You Would Like Additional Information On Any Specific Product Or Part, you can call us at 1-866-452-4563 between 9AM & 5PM (central time) Mon. thru Fri. and we will get your Quote to you ASAP

Smitty's Equipment Sales & Service

1705 W. Armitage Court

Addison, IL. 60101

1-630-678-9010

"Accredited Member of the Better Business Bureau"

All Logos, Names, Trademarks and illustrations throughout this site are the property of their respective owners.