Back To Home Page

FIND OUR WEBPAGE LINKS BELOW

TERMS & CONDITIONS

 

Challenger Lifts

 

BendPak Lifts

 

Quality Lifts

 

Globe

In-Ground Lifts

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Rotary Lifts

 

Rotary Accessories

 

Portable Heavy Duty Truck Lift

 

Ranger Wheel Alignment System

 

Vehicle Lift 

Height Adapters &

Replacement

Rubber Pads

 

Power Units

For Lifts &

Power Unit

Repair Parts

 

CHAMPION

Air Compressor Repair Parts

 

Saylor-Beall

Air Compressors

 

Lincoln

Lube Equipment

 

Lincoln

Hose Reels

 

Samson

Lube Equipment

 

Samson 

Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Branick

Tire Cages, Tire Spreaders, Brake Bleeders & Strut Compressors

 

Tire Racks, 

Parts Washers,

Storage Lockers, 

Work Benches,

Oily Rag Cans

 

Oil Filter Crushers

& Tank Monitors

 

OIL TANKS &

Tank Gauges

 

Exhaust Pipe Benders

Ben Pearson

& BendPak

 

Waste Oil 

Drains

 

Brake Lathes,

Tire Machines, Wheel Balancers,

& Accessories

 

Nitrogen

Tire Inflation Equipment

 

Work Lights,

Portable Under-Hood Work Light System & Fluorescent Lighting

 

 Air Conditioning Refrigerant &

Engine Coolant Servicing Equipment

 

FLOOR JACKS,

Engine Hoists,

Shop Presses,

Vehicle Dolly, Jack Stands &

Other Equipment

  

TERMS &

CONDITIONS

 

 Prices shown do not include any applicable sales taxes. Illinois Sales Tax will be added automatically to orders from Customers in the State of Illinois. Customers outside of Illinois are responsible for paying any taxes owed to the State, County, Parish or Municipality in which they reside. All shipments made within the State of Illinois will be charged 8.25% sales tax.  

 

 

Call us at

630-678-9060 for free repair advice before ordering parts you're not very accustomed to. We're available much of the day specifically for that reason.  We may just save you some time as well as the re-stocking cost of ordering incorrect parts and having to return them. We're here to help you the best we can!

Please keep in mind that we are only going to sell you parts that you specifically approved of, and we will try to supply you with your lift model parts breakdown if you want one so it will help you determine the correct parts you may need.

 

 

 

TERMS &

CONDITIONS

Auto Lift Power Units & Power Unit Repair Parts

PUSH THE F5 KEY ON YOUR KEYBOARD, TO REFRESH THE WEB PAGE AND VIEW UPDATED ITEMS

NEW Power Units Click Link

Rotary Lift "Global Brand" Power Unit Repair Parts  Click Link

SPX "Fenner Brand" Power Unit Repair Parts Click Link

SPX Fenner Power Unit NOT LIFTING WELL? K-40 Pump Replacement Seal Kit Click Link

Older Fenner Power Unit Parts Click Link

SPX Fenner Power Unit with Height Limit Shut-Down Switch   Click Link

SPX Fenner Power Unit with Larger 6 Gallon Tank   Click Link

SPX Fenner Power Unit for 25K & 30K Capacity Lifts with 6 Gallon Tank   Click Link

115 Volt SPX Fenner Power Unit   Click Link

Mid-Rise Lift 115 Volt Power Unit    Click Link

SPX Fenner Power Unit WIRING DIAGRAM   Click Link

 

Rolling Jack Power Units Click Link


Free UPS or other "Ground" Delivery to Our Customers 

in the 48 Contiguous United States on  items marked "Delivered" 

(Smitty's reserves the right to choose the method of Free Delivery)

Contact us for Alaska, Hawaii, Puerto Rico 

& Canada UPS Shipping Quote - Call 630-678-9010

Want it Faster? or Overnight? 2nd Day or 3 Day Select? 

United Parcel Service expedited shipping quotes are available. 

Contact us for UPS Quicker Shipping. 

Call 630-678-9010 and have your order ready so we can provide you with a quote.

 

Order Parts Here Online, or by Telephone, Call 630-678-9010

Between 9 AM and 4:30 PM (central-zone) Mon thru Fri

  

Smitty's Equipment Sales is a PayPal "Verified" Business With an A+ BBB Rating

 

 Check out with PayPal and choose PayPal Credit. Subject to credit approval. See Terms.


"DELIVERED" on this website means "FREE SHIPPING" and we mean it!


Smitty's Equipment Sales - Return Policy - Terms & Conditions Page  LINK

Illinois Purchases Will Have 8.25% Sales Tax Applied.

 

 

 


   


SPX FENNER FLUID POWER, BUILT IN ROCKFORD ILLINOIS

THE BEST, MOST RELIABLE POWER UNIT ON THE MARKET! 

Vehicle Lift 220 Volt Power Unit Kit For Most 9K or 10K Capacity Auto Lifts

 $459.00 Delivered

Built In Rockford Illinois!

(Beware of the Foreign Built Brands Being Sold For Less, They Do Not Compare To SPX Fenner)

Always In-Stock! Ships Out Same Day, M thru F!

Vehicle Lift Power Unit Kit For Most 9K or 10K Capacity Auto Lifts

  Sale! $40.00 OFF!

  Sale! $499.00 $459.00  Free Shipping

       SPX Fenner single phase 220V with 4-gallon black tank

CLICK TO SEE POWER UNIT SPECIFICATIONS LINK

 

NOTE: Local Chicago Area "Will-Call" Price $459.00 Tax Paid! 

Your total cost $459.00  Will Call - Pick-Up Only

($424.02 + $34.98 sales tax = $459.00)

 

NOT for lifts that are controlled by a keypad, this power unit is 

operated directly from the power unit itself.

 

(Note: Power Units & Electronic Equipment is NOT Returnable)

 

Manufacturers Warranty - 1 Year Parts. Note: Warranties are processed at SPX Fenner in Rockford IL, their inspection of the power unit determines the warranty refund or repair. It is the responsibility of the end user of the unit to ship the power unit in to our warehouse if it can't be repaired easily right on the worksite by the end user with Manufacturer supplied repair parts. 

NOTE! Some Lift Models May Need a Higher Rated Relief Valve because of their Engineering.

 

NOTE! Do not exceed the rated capacity of the lift or the individual lifting arms on it! 

Call us at 630-678-9010 for a relief valve PSI of your choosing for $45.00 Installed price  (Or if you just need one for an old power unit - For The Valve Only $68.00  Delivered Price)

 SPX Fenner Power Unit Relief Valve 

 

NOTE! THE "OIL RETURN LINE PORT" IS THE THIRD PLUG ON THE LEFT SIDE OF THE VALVE BODY.

NOTE! THE FIRST PORT ON EITHER SIDE OF THE VALVE BODY IS A PRESSURE PORT.

 

To change the Relief Valve, simply unscrew the cap on the valve body, replace the relief valve, and screw the cap back on the valve body. This simple task takes about 1 minute to do.

 

Keep your Manufacturer's Warranty Valid by filling your NEW 

SPX Fenner Power Unit with NEW Premium Hydraulic Oil.

New Power Unit Plus, Smitty's Premium Hydro Oil To Fill It! 

You get the power unit shown above and a 5 Gallon Pail of Premium Hydro Oil 

That's enough to fill the tank and have some left over to top off your other lifts

 or other equipment that calls for Grade 32 hydro Oil.

Only $559.00 for Power Unit with Hydro Oil "Free Shipping" 

AB1488/AC10AH with 4 Gallon Black Tank and 5 Gallons Smitty's Premium Hydro Oil

 

(Hydro Oil Normally $120.00 Delivered)

 

 

IMPORTANT! When ordering a new power unit, please check the motor on your old power unit and make sure you are ordering the correct "electrical phase" power unit motor. 

This is a single phase power unit. We are not responsible for the wrong phase power unit being ordered. Electrical Equipment is Not Returnable, please make sure the phase you need is Single Phase.

 

(Note: Power Units & Electric Motors Are NOT Returnable)

NOT FOR ROTARY "iNBAY" MODEL LIFTS 

This power unit will work right out of the box on 9K, 10K or 11,000 pound capacity lifts.  

On 7,000 the relief pressure valve should be reduced, on 15K, 18K and 24,000+ pound capacity lifts the Relief Valve pressure can be increased to accommodate the higher lifting capacities.

 

 Power Unit (IMAGE ABOVE) Has 4 Gallon Tank 

Automotive Lift Power Unit that's widely seen on many lift brands, used by Challenger, BendPak, Quality, Manitowoc, and many other lift Manufacturers. This SPX Fenner Power Unit was also used on almost every Rotary Lift made before they decided to start using the Italian made 

"Global Power Unit" that costs twice the amount to replace when you need to.

 

This single phase 220v power unit can be adapted to almost any 2-POST or 4-POST vehicle lift requiring a 4-GALLON TANK CAPACITY that had a different brand power unit originally mounted on the column.  (The removable plastic plug to the left of the lowering valve on the side of the valve body is the pressure hose hook-up point. There is a capped return hose port too, if you need it.) 

NOTE! This unit will not work on "Rotary InBay Model" lifts.

 

It works well for 4-POST lifts that require a 4 gallon tank capacity too!

 

Manufacturers Warranty - 1 Year Parts. Note: Warranties are processed at SPX Fenner in Rockford IL, their inspection of the power unit determines the warranty refund or repair. It is the responsibility of the end user of the unit to ship the power unit in to our warehouse if it can't be repaired easily right on the worksite by the end user with Manufacturer supplied repair parts. 

For more info see our TERMS & CONDITIONS page.

 

Specifications for the power unit above:

Adjustable Lifting Capacity - By Changing the "Relief Valve"

This power unit will work fine on almost any brand 9K, 10K even 11K pound capacity lift. 

To use on a 15,000 or 18,000 pound capacity 2-post or even larger capacity 4-post lift you may want to purchase a different "relief valve" to raise the working pressure from the standard 2,450 PSI the unit has, to a higher PSI for higher output pressure. To use on a lift under 9K pound capacity, the Relief Valve should be changed to a RV-16 or even lower depending on the lift arm capacity. 

 

To change the Relief Valve, simply unscrew the cap on the valve body, replace the relief valve, and screw the cap back on the valve body. This simple task takes about 1 minute to do.

 

It has a pressure outlet available on either side of the valve body for hook-up and a return line port available if you need one. Extra ports are capped so if you don't need them, just leave them alone.  

 

Over-height limit switch wires from the top switch on your lift (if you have them) just need to interrupt one motor power wire while your wiring it up. Simple Hook-Up! Call 630-678-9060 for help.

 

Need A "Cable Pull Type" Over-Height Switch Unit? $589.00 Delivered  CLICK THIS LINK

If you have a Forward or other brand that has a "thin cable operated over-height limit mechanism" you may want the unit at this LINK It has a built in limit switch that the cable pulls to kill the power.
Or, you can purchase the Power Unit at the top of the page and order the Over-Height Switch Assembly for $49.00 found at this
LINK and install it yourself and save about $75.00!!

 

See SPX Manual on the power unit shown at top. AC-10AH LINK

 

Motor -  208-230 Volt AC, 3,450 RPM, 1 PH, 60Hz, 19 Amps, 2.0 HP.
Amp Draw - 19.0 Amps @ 2,450 PSI.
Hydraulic Pump - 1.7 GPM @ 2,450 PSI.
Relief Valve - (RV-17) Fixed at 2,450 PSI Nominal. Optional relief valves available for higher pressure
Valve Body - Cast Iron with 3/8" NPT Auxiliary Port (plugged) and 9/16 SAE Pressure Port and 9/16 Hydro Fluid Return Port (if needed.)
Reservoir - Plastic 4 Gallon Tank 20H X 7W X 7.5D
Valve Type - Cartridge style Check Valve and Lowering Valve.

Model - AB1488 / AC-10AH (The "Limit Switch ready" model available too, click this LINK)

 

NOTE: It's always good idea to have a qualified Electrician hook-up your brand new power unit. Especially if you are not familiar with 220-Volt single or 3-phase electrical wiring. 

Improperly connected burned out power-units are not returnable. 


Manufacturers Warranty - 1 Year Parts.
Note: Warranties are processed at SPX Fenner in Rockford IL, their inspection of the power unit determines the warranty refund or repair. It is the responsibility of the end user of the unit to ship the power unit in if it can't be repaired easily right on the worksite by the end user with SPX supplied repair parts. For more info see our TERMS & CONDITIONS page.

Weight - 51 pounds Ships UPS Ground - Free Shipping to 48 Contiguous States

 

(Quicker shipping available at UPS quoted costs. Quote it yourself at ups.com we ship from Addison, IL. 60101)

Power unit wiring diagram LINK Click Here

IMPORTANT! When ordering a power unit, please check the motor on your old power unit and make sure you are ordering the correct electrical phase power unit. Choose either single phase or three phase power units. 

We are not responsible for the wrong phase power unit being ordered. 

 

(Note: Electrical Power units Are NOT Returnable but are covered by a Manufacturers Warranty)

 


NEED A 110 VOLT POWER UNIT? Click Here LINK


 

 

"E-Z Hook-up" Power Unit 

Hose Adapter Kit 

(Hooks Up Power Unit Pressure Outlet to Lift Cylinder Hoses) 

 EZ Hook-Up Hose Kit 

"E-Z Hose Adapter Kit" includes the following parts: 36" hydraulic hose, 90 elbow to attach hose to power unit, swivel branch tee, 8" hydraulic hose and a 28" tie band.  This convenient kit makes it easier to adapt the SPX Fenner power unit to almost any brand lift with power unit mounted on the side of the column.  NOTE: This kit works along with your lifts existing hoses, it does NOT have the full lengths of hoses to totally equip your lift and is intended to help adapt a replacement power unit to your existing system. Depending on what lift you are adapting your new power unit to, there may be additional oil hose or oil piping adapters or connections you may need that may not be part of this kit. 

$59.00 Each Delivered 

    


 

 

 

Power Unit Hose Hook-Up Elbow CL-16167  

USED ON POWER UNITS TO ALLOW SINGLE HOSE HOOK-UP.

90 Elbow to Attach 3/8 Male Hydro Hose to Power Unit Valve Body.

 Has "O" Ring Seal, so elbow can be positioned properly.

 

$25.00 Delivered 

  

 


 

 

 

ROTARY FJ7668  

USED ON POWER UNITS TO SPLIT PRESSURE TO TWO HOSES

Branch "T"  Two 3/8 Hydro Hose 2-Male Hook-Ups and 

One Male Power-Unit Hook-up with "O" Ring

 

$27.00 Delivered 

    

 


 

 

 

 Branch T  

To Split Pressure Hoses For Two Hydro Cylinders

Branch "T"  All 3/8 Hydro Hose Hook-Up 2-Male and 1-Female. 

 

$28.00 Delivered 

   

 


 

 

Female Hose to Male NPT Cylinder Adapter  

3/8 Female Hose Connection to 1/4 Male Thread

Used to Connect Hydro Hose Male Thread  to Hydro Cylinder 1/4 NPT

 

$25.00 Delivered 

  

 

 


 

 

 

  RL-FJ7352-3 3/8 Male Hose Connection to 1/4 Male Thread with "O" Ring

Used to Connect Hydro Hose Female Thread to Hydro Cylinder 1/4 NPT

 

$25.00 Delivered 

 

 

 

 


 

 

 

NEW POWER UNIT?  Protect your Warranty

by using New Hydraulic Oil in it!

 Hydraulic Power Unit Oil 

Premium Quality Grade 32 Non-Foaming Hydraulic Oil 

 

  Click to Enlarge Image

5 Gallons $120.00 Delivered 

DELIVERED = FREE SHIPPING

($20.00 Discount if purchased with a New Power Unit)


 


Insist on having a Rotary OEM New Style Power Unit? Click Here


 

Height Limit Switch 

 Model Power Unit 

Same style as above power unit, but pre-wired with Kill Switch mounted in box (pointing upwards) that is cable operated for "pull cable" style overhead height limit application used on some Forward Lifts and several other brands of lifts. 

CABLE PULL SWITCH SHOWN ON TOP OF ELECTRICAL BOX

 

(If you don't need the pull-switch and have wires to hook-up instead, just order 

the power unit at the top of this page and interrupt one power wire with the 

overhead switch wire from your lift.)

 

1 Year Manufacturers Warranty

SPX Fenner Stone Power Unit (limit switch pre-wired) Single 

Phase Power Unit Complete Unit

Motor -  208-230 Volt AC, 3,450 RPM, 1 PH, 60Hz, 19 Amps, 2.0 HP.
Amp Draw - 19.0 Amps @ 2,450 PSI.
Hydraulic Pump - 1.7 GPM @ 2,450 PSI.
Relief Valve - (RV-17) Fixed at 2,450 PSI Nominal.
Valve Body - Cast Iron with 3/8" NPT Auxiliary Port (plugged) and 9/16 SAE Pressure Port and 9/16 Hydro Fluid Return Port (if needed.)
Reservoir - Plastic 4 Gallon Tank 20H X 7W X 7.5D
Valve Type - Cartridge style Check Valve and Lowering Valve.

Model - AB1270 / AC-10KS

NOTE: It's always good idea to have a qualified Electrician hook-up your brand new power unit. Especially if you are not familiar with 220-Volt single or 3-phase electrical wiring. Improperly connected burned out power-units are not returnable. 

 

See SPX Manual on this AC-10KS/AB1270 unit LINK

 

Limit Switch Power Unit $589.00 Delivered!  

   

(Note: Electrical Parts Are NOT Returnable)

 

Or, you can purchase the Power Unit at the top of the page and order the Over-Height Switch Assembly for $59.00 found at this LINK and install it yourself and save!

 

 


Here's a Better Deal you might be looking for!  

Fresh Oil and your New Power Unit (like above) start it out with new oil!

You get the power unit shown above and a 5 Gallon Pail of Premium Hydro Oil. That's enough to fill the tank and have a gallon left over to top off your other lifts or equipment that calls for grade 32 hydro oil.

Only $689.00 Delivered 

Always In Stock

 

(Hydro Oil Normally $120.00 Delivered)

 


"DELIVERED" on this website means "FREE SHIPPING" and we mean it!


Smitty's Equipment Sales - Return Policy - Terms & Conditions Page  LINK

Illinois Purchases Will Have 8.25% Sales Tax Applied.

 


 

THREE PHASE 220V POWER UNIT 

Three Phase SPX Fenner power unit with 4 gallon tank 

2 HP, 220 Volt, 3 phase motor. 

Relief valve set at 2450 psi. (optionally upgradeable to higher psi pressure)

 1 Year Manufacturers Warranty

Sale! $40.00 off!

        $639.00 Delivered

(Note: Electrical Parts Are NOT Returnable)

 

 


Call 630-678-9010

Order Online or by Phone, Call Between 9AM and 5PM Mon thru Fri

 


 

 

SPX Fenner Power Unit has Six Gallon Tank   

Large Oil Capacity Power Unit

Used on many 4-Post Lifts, Quick Lube Racks & Alignment Racks

Measure your existing tank to make sure you really need this

large oil capacity model power unit for your lift.

Tank is 42" Tall with 7" Diameter

If your power-unit has a large capacity oil tank, you need to replace it with the same size or larger,

that way the hydraulic cylinder will have enough oil to extend all the way & raise the lift completely.

This power unit can be adapted to vehicle lifts that originally had a different 

make power unit originally.

 

Available in Single Phase 220V or Three Phase 220V

 

Power Unit has an RV19 Relief valve in it with 2755 PSI operating pressure 

suitable for up to 25K capacity 4-Post lifts

See SPX Manual on this AC-10FP unit LINK

 

 1 Year Manufacturers Warranty

(Note: Electrical Parts are NOT Returnable)

 

     $595.00 Delivered!  220V Single Phase   

  $789.00 Delivered! 220V Three Phase  

 


 

Large Oil Capacity Power Unit for 

25K and 30K Pound Capacity Lifts

     $649.00 Delivered!  220V Single Phase   

 

Call for 3 Phase Quote

 


"DELIVERED" on this entire website means "FREE SHIPPING" 

 


 

IMPORTANT! When ordering a power unit, please check the motor on your old power unit and make sure you are ordering the correct electrical phase power unit. Choose either single phase or three phase power units. 

We are not responsible for the wrong phase power unit being ordered. 

SPX wiring diagram for power unit with resistor

Power Unit Wiring Diagram.  Just click to enlarge and then print!

Standard wiring diagram without resistor  

NOTE: It's always good idea to have a qualified Electrician hook-up your brand new power unit. Especially if you are not familiar with 220-Volt single or 3-phase electrical wiring. Improperly connected burned out power-units are not returnable. 

 


 

 

 115 Volt Power Unit

SPX Fenner

115 VOLT POWER UNIT WITH 4 GALLON TANK

For 2 or 4-post vehicle lifts needing 4 gal capacity or less

SPX Fenner single phase, 1.5 HP motor, 115 volt, 

2450 PSI. Fenner Model AB1396

 1 Year Manufacturers Warranty

 

(Like the power unit at top of the page but with 115 volt motor)

115V Power Unit SALE! $70.00 Off!  $719.00 $649.00 Delivered!  

   

 

(Note: Electrical Parts Are NOT Returnable)

Manufacturers Warranty On All SPX Power Units - 1 Year Parts. Note: Warranties are processed at SPX Fenner in Rockford IL, their inspection of the power unit determines the warranty refund or repair. It is the responsibility of the end user of the unit to ship the power unit in if it can't be repaired easily right on the worksite by the end user with SPX supplied repair parts. For more info see our TERMS & CONDITIONS page.

Weight - 51 pounds Ships UPS Ground - Free Shipping to 48 Contiguous States


 

Power Unit for Mid-rise Lifts & Small Scissor Style Lifts 

Midrise lift power unit 110 Volts

SPX FENNER Power Unit with 1 gallon Tank for Mid-rise Lifts 

and Small Scissor Style Lifts popular in Tire Stores & Body Shops

 1 Year Manufacturers Warranty

2175 PSI Relief Valve

 

115 Volt, 1.5 Horsepower, 1 Gallon Oil Capacity  

(Make sure your lift operates on one gallon or less of oil.)  

 

See SPX Manual on this AC-10TC unit LINK

$597.00 Delivered   

 

(Note: Electrical Parts Are NOT Returnable)


Air Operated Hydraulic Power Units for Mid-rise and Low-Rise Lifts available too!  Call Us 630-678-9010


Rolling Jack Replacement Power Units

  Air Operated Power Units For ROTARY Rolling Jacks  

"Shoebox Style" Replacement Pump Conversion Kits 

3200 psi Pump Kit with orifice

NOTE! Make sure your Rotary Rolling Jack requires the model pump you purchase!

 

Original OEM Rotary FA5121

  $969.00 Delivered 

 Rotary FA5121 Pump

 


Non-Rotary Pump & Conversion Kit Like FA5121(above) $689.00 Delivered 

 

 

 


 

Original OEM Rotary FC5889kit

  $969.00 Delivered 

 Rotary FC5889 Pump

 

Original OEM Rotary FC5949 power unit

  $969.00 Delivered 

Rotary FC5949 Pump

 

One year Manufacturers warranty from date of purchase


 

ROTARY ORIGINAL Power Units

 Round Cylindrical Style Enerpac Brand Pump FA563

NOTE! Make sure your Rotary rolling jack requires this model pump!!!

  $829.00 Delivered 

(one year manufacturers warranty from date of purchase)

Model FA563


 

ROTARY ORIGINAL FA5120 power unit

Round Cylindrical Style Enerpac Brand Pump FA5120

NOTE! Make sure your Rotary rolling jack requires this model pump!!!

  $879.00 Delivered 

Model FA5120

 

 

 


Order Online or by Phone, Call 630-678-9010 Between 9AM and 5PM Mon thru Fri

Call between 9 AM & 5 PM (Central Time) Mon. thru Fri. NOTE: If you get the "phone lines are busy" message, or we are out of the office and you get our answering machine, please be patient and leave a message anyway and we'll get back to you ASAP to help you out.

 


 

"DELIVERED" on this entire website means "FREE SHIPPING" 

 


 

 

ROTARY Replacement Global Hydraulic

Power Unit (Imported from Italy by Rotary Lifts for Rotary Lifts Original Equipment Replacement Part)

For SPOA9 & SPO9 2-post 9,000 Pound Capacity Rotary Lifts 

(You can also use the unit at the top of this page and save a lot of money)

 New Style OEM Rotary Pump Unit 

Rotary P1120KIT

Motor: 2 HP, 1 Phase, 60HZ, 208-230 V, 1700 RPM
Amp Draw: 16/17 amps FLA
Reservoir: 10 quart plastic reservoir with filler/breather cap
GPM: 2.2 GPM
Relief Valve: Cartridge Style Pressure Relief Valve, Preset at 2320 PSI
Port Size: SAE 6 (9/16-18)
Check Valve: Built in Ball Check Valve
Up Switch: Momentary Push Button Switch
Lever Style Manual Lowering Valve 

Dimensions
29-1/2 tall x 8 wide x 9-1/2 deep
Vertical Mounting  
Fittings included (will fit most Rotary lifts)
Universal Mounting Bracket included (will fit most lifts)
Attachment Hardware included
Warning/Caution Labels included
Warranty One year from factory ship date

(Note: Electrical Parts Are NOT Returnable)

Replacement Power Unit  P1120KIT = P502/518/602/702/709 TO P3350+  

 $1049.00 Each Delivered!

Complete Power Unit Replacement Kit for 9K capacity lift


Same As Above, But For SPOA10 & SPO10

  10,000 Pound Capacity Rotary Lifts 

(You can also use the unit at the top of this page that will save you a lot of money)

P1302 now P3302 Single Phase Power Unit 60HZ 230V 4.3CC RV19

(Replaces P1302)

 $1049.00 Delivered

  Complete Power Unit Replacement kit for 10K capacity lift

 


 

 Rotary Global Power Units for Rotary InBay model lifts. 

Make sure you order the same Power Unit Model number that is on your lift because these units are not returnable if you order the wrong one. Rotary added "KIT" behind each part number.

(Note! Electrical Parts Are NOT Returnable)

 

P1164KIT $1627.00 Delivered = Free Shipping

  P1164

 

P1364KIT $1621.00 Delivered = Free Shipping 

  P1364

 

P1372KIT $1766.00 Delivered = Free Shipping 

  P1372

 

Need one you don't see here? Call 630-678-9010 for a quote.


IMPORTANT! When ordering a power unit, please check the motor on your old power unit and make sure you are ordering the correct electrical phase power unit. Choose either single phase or three phase power units. We are not responsible for the wrong phase power unit being ordered. 

 

 

PUSH THE F5 KEY ON YOUR KEYBOARD, TO REFRESH THE WEB PAGE AND VIEW UPDATED ITEMS

 


Rotary Global Power Unit Parts


 

 

 

Global Power Unit Hydro Pump Seal Replacement Kit

 

"O" Ring & Seal Kit Revitalizes ROTARY & Newer FORWARD LIFT P1000 Series

& P3000 Series Italian Made GLOBAL Power Unit (Shown Directly Above)

  GENUINE ROTARY PART

 If your power unit is losing pressure and has difficulty lifting vehicles like it used to, you may need to replace the internal pump seals...

Worn leaky seals between the pump and valve body inside the power unit tank, allow the oil from the pump to squeeze past and return to the tank instead of filling the hydraulic cylinders. A worn "O" ring between the pump and suction tube allows air into the system and can also cause the pump to lose it's "prime" and take longer to build pressure before it begins to raise the load...

Kit for P3000 Series Global Units P3000-12 ROTARY Original Seal Kit

Pump seal kit for ALL GLOBAL P3000 Series units 

   $85.00 Delivered


 

P1002-12 P1002-12 ROTARY Original Seal Kit

 

Pump seal kit for ALL GLOBAL P1000 Series units 

   $65.00 Delivered

NOTE! Not for SPX Fenner Power Units. If you have a SPX power unit look BELOW for the K-40 Seal Replacement Kit LINK


Replacement Manual Lowering Valve 

P1106 for "Global" Rotary Power Unit (Above)

 

Manual Lowering valve for P1000 series units

 

$129.00 Delivered 

  Valve only (Use old Handle)

 


P1002-10 Handle for Lowering Valves

 P1002-10

$35.00 Delivered

 

 


 

Manual Lowering valve for P3000 series units

$289.00 Delivered 

  Valve only (Use old Handle)


 

24 Volt Electric Solenoid Lowering valve for 

P1164, P1166, P1168, P1170, P1172, P1174, P1176, 

P1364, P1366, P1368, P1372, P1378, P1385 series power units 

$156.00 Delivered

     P1164-2 Electric Lowering Valve

 

Call for More Inbay parts call 630-678-9010


 

CHECK VALVE for P1000 series power units

 P1104 Global Check Valve

Part # P1104

$269.00 Delivered 

       

 


 

Motor to Pump Coupler for Rotary Global Power Unit

 

 FA7138-4 Global Power Unit Coupler

FA7138-4

 

$37.50 Delivered

    

 


Replacement Motor Capacitor For Rotary "Global" Hydraulic Power Units

Motor Capacitor For ALL Single Phase Rotary Global Power Units

Global power unit suddenly quit working?  You may only need to replace this capacitor.

 

 7512-70.jpg (149911 bytes)

 

Motor Capacitor FA7147-5 220V  

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

$42.00 Delivered

  Capacitor 220V 

(NOTE: 3-Phase power units with a barrel type switch do NOT have a capacitor in them)

 


 

Replacement Power Unit Switch 

For Rotary "Global" Power Unit  

  Button has two spade type connectors & plastic button

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

$35.00 Delivered 

P1483 Single Phase Replacement Switch Assembly

 


 

 

Rotary "Global" Power Unit Single Phase Switch & Cover Assembly 

 

 FA7200K-Kit "Rotary Original Part"

Single Phase 208/230 Volt Switch and Cover with screws

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

$65.00 Delivered

 


 

 

FA7147K Rotary Replacement Motor Kit

For Single Phase "Global" Power Units Only

 

 Rotary FA7147 Motor Kit

 

Kits include new bolts and shaft coupler

 220-Volt  1-Phase 

(Note: Electrical Motors Are NOT Returnable, but do have a 90 Day Rotary Warranty)

FA7147K has a 90 Day Warranty by Rotary Lift from date of purchase, processed by Rotary

 

$589.00 Delivered

 

 


 

FA7146 Rotary Replacement Motor Kit

For Three Phase "Global" Power Units Only

 

 208-230/480 Volt  3-Phase 

(Note: Electrical Motors Are NOT Returnable, but do have a 90 Day Rotary Warranty)

FA7146 has a 90 Day Warranty by Rotary Lift from date of purchase, processed by Rotary

 

$598.00 Delivered

 

 

 


 Replacement Tank Kit For 

 Rotary "Global" Power Units (Above) 

 

    P1427

New Tank Cap & Suction Tube Included 

(Black Plastic Tank Has A White Top, Easy To Identify)

 

10 Liter Capacity (2.64 Gallons)

16.5 inches tall, 7 inch X 7 inch square bottom

 

Tank has 5 inch opening at top with 4 screw holes that are 4-1/2 inches apart

 

For ROTARY Global Brand Power Unit 

P1427Kit  $109.00 Each Delivered

  10 Liter Tank Kit P1427KIT - 7542-63

 

 

 P1528 Tank Cap Included

(This Rotary Original Tank Has The Breather Fitting Installed)

14 Liter capacity (3.7 Gallons)

ROTARY Global Power Unit Tank

22 inches tall, 7 inch X 7 inch square bottom

P1528Kit  $119.00 Each Delivered

14 Liter Tank Kit P1528

 

 

Call for 18.5 Liter Tank P10283kit 630-678-9010


"DELIVERED" on this website means "NO DELIVERY FEE" 


 

Rotary INBAY Raise Switch replacement kit T100155

 

For 1 Phase or 3 Phase Usage

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

$69.00 Delivered

   

 


 

"DELIVERED" on this entire website means "FREE SHIPPING" 

 


 

 

 


SPX Fenner-Stone Parts


 

 

SPX Fenner-Stone Switches

 

NEW Power Button Including Relay 

for "Modern" SPX Fenner Stone Power Units 

(For single phase power units like the one at the very top of this page.)

 

   

 

 Metal cover is 6" high and 5" wide

REPLACEMENT "Newer style" W-401-230 SPX POWER UNIT COVER, 

Activation Button Housing & Micro-Switch Complete Assembly  

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

(List $143.00)

$107.00 Delivered 

 

Complete 6" X 5" cover assembly


 

  Fenner Switch Housing

 

Replacement Green Switch Housing for Cover (Shown above)  $42.00 Delivered 

    Green Housing Only

 

 

 

Green Switch Housing (Above) AND Micro-Switch (Shown below) $59.00 Delivered 

  Micro-switch and Green Switch Housing

(Separately would be $65.00)

 


 

 

Micro-Switch Only for Newer SPX Fenner Cover Assemblies

(Like Two Shown Directly Above & Below)

    

Switch has Two "Spade Type" Connectors

 

Small replacement "normally-open micro-switch" 

clips on to back of power unit button assembly (shown above) $23.00 Delivered  

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

   Micro-switch only

 


 

 

Older Style SPX Fenner Electrical Box Cover

W-200-230 Switch & Cover Assembly 

 

(Like W-401-230 above but smaller and has no relay)

 

Includes Power Switch 

  4-1/2" High X 3" Wide Metal Cover  

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

$112.00 Delivered 

Complete 4-1/2" X 3" cover assembly

(Replacement Switch for this style cover is right below)


 

 

Power Unit Momentary On / Off Switch

 

Older Style Well Made, Heavy Duty, 25 Ampere Power Unit Micro Switch or 

Overhead Limit Switch Replacement  Micro-Switch  

 MicroSwitch Normally Open or Normally Closed (Same as Rotary P461-2 Switch)

 

Has 3 brass screws on back for using "NO" or "NC"

2" Long  X  7/8" High  X  5/8" Wide

25 ampere 125-230 Volt switch for many 220 volt single phase power units.  

Brass threaded 3/8" button housing with metal button. 

Use either "normally-open" for power unit activation switch 

or use "normally-closed" for height limit cut-off switch 

 

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 

Heavy Duty Micro Switch $39.00 Each Delivered 

       Switch Only 

 


 

Micro Switch (Above) with Protective Boot (Below)  $49.00 Delivered

         Switch and Boot 

 


 

Micro Switch Protective Boot (Only)

Keeps dirt, grease & water out of the button mechanism

SWITCH BOOT

$18.50 Delivered 

      Boot Only

 

 

"DELIVERED" on this website means "NO DELIVERY FEE" 


 

Three Phase "TWIST STYLE"

Power Unit Switch 

 

Click To Enlarge

  "Twist Style" 3 Phase Switch

Measurements: 2 Inches deep X 2 Inches wide

(Complete as shown in image)

30 AMP 

600VAC

Heavy Duty Double Throw

For 2 HP to 10 HP Motors

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

$149.00 Delivered

"Three-Phase Switch"

            

 


 

Same as Above but "Single-Phase"

$189.00 Delivered

"Single-Phase Switch"

             

 

 

 

 

 

 


 

NUSSBAUM RAISE SWITCH

 

 

 Part 85.230 Raise Switch Assembly $255.00 Delivered 

(Check your NUSSBAUM Lifts Manual and confirm 85.230 as the switch you really need)

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

 


 NUSSBAUM Contactor

Part #50.026

 

Part 50.026 Contactor $89.00 Delivered 

USED ON MODEL STL7000 LIFT

 

(Check your NUSSBAUM Manual if not a model STL7000 & confirm 50.026 as the part you need)

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

   


 

 

MTE (& Other Brand) POWER UNIT Button

6 Spade Connectors 

Dual Throw 

  

69210034 Switch

$74.00 Delivered 

 

 

 


 

 

 

Replacement POWER UNIT HEIGHT LIMIT SWITCH

For SPX Fenner and other power units 

For lift models that use a thin wire cable to pull and operate the over-height switch.

Complete limit-switch assembly including micro-switch - can be used to add a limit switch to power units that previously didn't have one installed. 

 Lift Power Unit Limit Switch For Cable Pull System Switch mounts in box on power unit with pull pin facing upwards. Switch installed as shown here

Adjustable "Trigger Pin Pull" by tightening or loosening threaded connection in housing

  Limit Switch Assembly $59.00 Delivered 

(While they last only)

(Note: Electrical Parts Are NOT Returnable If Plastic Bag Is Opened)

S-Lmtswtch

 

 

 


 

 

SPX Fenner 4 Gallon Power Unit Tank (newest style) 

 SPX Fenner 4 Gallon Tank

Tank has 4-1/2" opening at top with 4 mounting bolt holes that are 4" apart.

Four gallon tank is 20-1/4" tall and has a  7-1/2"  X 7" Rectangular Bottom. 

(Breather style tank cap can be purchased separately below if needed.)

 

 

 $95.00 Delivered!  

SPX Fenner Black Plastic Tank (Only) 

    5141AC Black Plastic Tank Does NOT Include Breather Cap

 


 

 SPX Fenner 4-Gal. Black Power Unit Tank & New Breather Cap 

$119.00 Delivered

SPX Fenner Black Tank Including New Breather Cap 

     5141AC Black Plastic Tank + New Breather Cap 

 

 

 


 

Translucent Tank - SPX Fenner Original 

Same As Tank Above, But Allows Oil Level To Be 

Seen Easily, Right Through The Tank. 

   

5297AC Translucent Tank

 

 4-1/2" opening at top with 4 mounting bolt holes that are 4" apart.

Four gallon tank is 20-1/4" tall and has a  7-1/2"  X 7" Rectangular Bottom. 

(Breather style tank cap can be purchased separately below if needed.)

 

 $110.00 Delivered 

SPX Fenner Translucent Tank (Only) 

    S-5279AC Translucent Plastic Tank Does NOT Include Breather Cap

 


SPX Fenner 4-Gal. Translucent Tank & New Breather Cap

$136.00 Delivered 

     S-5279AC Translucent Plastic Tank + New CL-260185 Breather Cap 

 


 

 

 Replacement Breather Cap (ONLY) For SPX Fenner Tanks $29.00 Delivered 

 260185 Breather Cap for SPX Fenner Tank

    260185 Cap Only

 


SPX FENNER STEEL POWER UNIT TANK FOR EARLIER FENNER POWER UNITS CLICK HERE


 

 

New SPX FENNER Oil Pump (inside tank) PS-2.5  with Hi-Pressure Seals & "O" Rings 

 

 

$125.00 Each Delivered

       

 


"O" Ring & Seal Kit for Pump - Revitalizes Your Old SPX Fenner Oil Pump

Sale $25.00  Each Delivered  

     K-40 Seal Kit

 


Original SPX Fenner K-40 Seal kit also available!  

"O" Rings "Formed" to correct shape and Shaft Seals Fit like a Glove! 

Sale $35.00 Each Delivered

 


SPX Fenner In-Tank Suction Tube Kit   $69.00 

   w/screen, bolts to bottom of oil pump 

 

 


 

"Cylinder Return Oil Line Kit"

 

For some lifts like Benwil, Forward, PMW and others, that may have a return line

from the hydro cylinder vent/port going back thru the valve body to the power unit tank 

 

$159.00 Delivered  

Return Line Kit


 

Order Online or by Phone, Call 630-678-9010 Between 9AM and 5PM Mon thru Fri

Call 630-678-9010 between 9 AM & 5 PM (Central Time) Mon. thru Fri. NOTE: If you get the "phone lines are busy" message, or we are out of the office and you get our answering machine, please be patient and leave a message anyway and we'll get back to you ASAP to help you out.

 


 

 

 Hydraulic Power Unit Oil 

Smitty's Premium Quality! Grade 32 Non-Foaming Hydraulic Oil 

 

 

5 Gallons $120.00 Delivered 

DELIVERED = FREE SHIPPING

($20.00 Discount if purchased with a New Power Unit)


 

 

ATF for NEW SPX Fenner & NEW Rotary Global Hydro Power Units

5 Gallons $159.00 Delivered 

  DELIVERED = FREE SHIPPING

NOTE: You should add the same type of Oil to your Power Unit that is already in the tank. If it's Red it's ATF, otherwise the Non-Foaming Grade 32 Hydro Oil can be used. 


"DELIVERED" on this website means "NO DELIVERY FEE" 

 

 

SPX Fenner-Stone 

Power Unit Parts

Same as old Rotary "P700" Series & used on all Challenger, Quality and some BendPak Lifts

Scroll Down For Earlier Model Fenner Pump Parts Breakdown

 

 CLICK TO ENLARGE IMAGE  

Tank has 4-1/2" opening at top with 4-bolt holes that are 4" apart, it is 20-1/4" High and has a 7-1/2" X 7" Rectangular Bottom.

Item No. Our Part No. Description OEM Part No.
 
1 S7007-35 Micro switch Wiring Assy. W-29

For Micro-switch only, order 7004-19 (above) 

2 S7007-36 Micro switch Boot 4041-AA
 

3  Motor Costs Close To A  Complete New Unit 

2235-AC
 
4 Hardware Store  M6 x 1.0 - 35mm SHCS
 
5 Hardware Store Lock washer
 
6

Motor to Pump Coupler

1-1/4 inch long Coupler  1118-AA

 

S7004-18 coupling   $38.00 Delivered

 

 

SPX Fenner Release Handle Assembly New Style (Old Style found below under P-500 units)

7

Lowering Valve Handle Assembly

 $85.00 Delivered

  

 

 

 

VF9021 screws into valve body on

your power unit 

  

Lowering Valve shown installed

Lowering Valve VF9021

8 S7006-16

Lowering Valve Only

VF-9021

VF-9021   $64.00 Delivered

 


 

9 Check Valve Cartridge

2507-AA

S7006-17

  $65.00 Delivered

 

 

 
10

Fixed Relief Valve

fixed at 2320 psi

 

Fixed Relief Valve LINK

RV-16
 
 

10

RV-17

Fixed Relief Valve

fixed at 2450 psi

 

RV-17

 

 
11 S7007-39 Relieve Valve Cap 3729-AA
 
12 OB-70-348 Reservoir O-Ring G1-1073-48
 
13

S7006-21

 

Pump Assembly 

KP2.5

$125.00 Each Delivered

Delivered!

 
 
14 S7006-22 Mounting Bolt 1112-AA
 
15 & 16 S7007-41 Suction Plumbing Kit K-168

 Suction Tube Kit   $69.00 

 

 

 

17 S7006-25 Pump O-Ring Kit K-40

K-40 Seal Kit $25.00 Delivered

 


Original SPX Fenner K-40 Seal kit also available!  

"O" Rings "Formed" to correct shape and Shaft Seals Fit like a Glove! 

Sale $35.00 Each Delivered

Original Equipment K-40 Seal Kit 

If you noticed a lost of lifting power, you may need to replace the pump "O" Rings and Seals... This K-40 Repair Kit is what you need to stop fluid from leaking back into your tank instead of being pumped to the hydraulic cylinders. This quick easy fix may just allow you to lift vehicles again and faster too.

 

 
18 7007-42 Steel Return Tube

 Return Tube Kit   $45.00 

T2-1006-83

 
 
 
20

TANK

4 Gal. Plastic Tank Has 4-1/2 inch opening at top with 4 bolt holes

5141-AC

LINK to Tank

 
 
21 S7007-44 Reservoir Screw 3346-AA
 
22 S7007-45 9/16" SAE Plug 1170-AA
 
23 S7007-46 Plumbing Elbow 2890-AA
 
24 S7007-47 Return Tube Fitting 816-217
 
25 S7007-48 Return Tube Sleeve 816-218
 

 

Call For Power Unit Parts Info & Quote

Call 630-678-9010 


EARLIER FENNER POWER UNIT 

PARTS AVAILABLE

Equal to Rotary P602 

Power unit has round steel tank with 4 mounting screws that screw vertically into valve body. 

Lowering Handle pushes button to lower lift. Lowering Handle has hinge that attaches around lowering valve with large ring nut.

SPX Fenner-Stone has Steel Tank

3.5 GALLON STEEL TANK  KR-44 

 $169.00 Delivered 

In-Stock!

Item No.

Our Part No.

Description

OEM Part No.

 

For Micro-switch only, order 7004-19

(above by switches or below with Series P500) 

1

S7006-30

Microswitch Wiring Assy. 

W-200

 

2

S7002-12

Microswitch Boot

1277-AA

 

3

 

Motor not available

 

4

S7006-13

Motor Adapter Kit

K-18

 

5

F-SC-0250-20-1625

1/4-=20 x 1-5/8 SHCS

 

 

6

 

Motor To Pump Coupler 1-3/4" Long

2181-BA

Coupler $38.00 Delivered 

S7006-14

7

S7006-15

Manual Release Assy.

K-100

 

8

Lowering Valve

  

  $64.00 Delivered

 

 

9

S7006-17

Valve Cartridge check

2507-AA

 

10

S7006-18

Fixed Relief Valve LINK

RV-16

 

11

S7006-19

Relief Valve Cap

1600-BA

 

12

OB-70-348

Reservoir O-Ring

G1-1073-48

 

13

Includes bolts 

& all seals

Pump Assembly

KP2.5

$125.00 Each Delivered

  KP2.5 Delivered

 

14

S7006-22

Mounting Bolt

1112-AA

 

15

S7006-23

Inlet Plumbing Kit

K-102

 Suction Tube Kit   $69.00 

 

16

S7006-24

Inlet Hose Assy.

2569-AA

 

17

S7006-25

Pump O-Ring Kit

K-40

 

18

S7006-26

Return Tube

T2-1006-27

 

19

S7006-27

Breather

1683-AB

 

 
20

3.5 GALLON STEEL TANK  KR-44 

 $149.00 Delivered 

 

 

 
20 Steel Tank 6.5 gal. TANK Call 630-678-9010
 

 

 

 SPX FENNER Pump Seal Kit

K-40 Seal Kit   $25.00 Delivered

 


Original SPX Fenner K-40 Seal kit also available!  

"O" Rings "Formed" to correct shape and 

Shaft Seals Fit like a Glove! 

Sale $35.00 Each Delivered

Original Equipment K-40 Seal Kit

If you noticed a lost of lifting power, you may need to replace the pump "O" Rings and Seals... This K-40 Repair Kit is what you need to stop fluid from leaking back into your tank instead of being pumped to the hydraulic cylinders. This quick easy fix may just allow you to lift vehicles again and faster too.

 

 

 Call 630-678-9010 

 



 

 

 This Power unit has a lowering valve held by a 2 piece black plastic box. The tank is round with 4 triangular clips with nuts and bolts that hold it on to the bottom of the valve body.

Fenner-Stone Power Unit Parts

("P500 Series" Rotary)

 

#20  Power Unit Replacement  Micro-Switch  7004-19

  

Use either "normally-open" for power unit activation switch, or "normally-closed" for height limit switch.

(Note: Electrical Parts Are NOT Returnable 

If Plastic Bag Is Opened)

$39.00 Each Delivered! 

   7004-19 Delivered!

#3 Tank no longer available
#15  

Tank Filler/Breather Cap with 3/8 inch male threads

 

7004-14

$32.00 

Delivered

#17

Tank Hanger Clip

Nut & Screw Kit 

$28.00 Each Delivered

 

 

 

$28.00

Delivered

"DELIVERED" on this website means "NO DELIVERY FEE" 

#5A

   Complete V12 Lowering Valve Assembly (Use This If Old Valve Still Leaking After Installing New "O" Ring Kit Below)

7004-06

$197.00 

Delivered

#5A Kit

V-12 Lowering Valve "O" Ring Replacement Kit. Stops Most Leaking Valves. Seal repair kit for both V12 and KV12

7004-06M

$29.00 

Delivered

#5B

 

KV-12 Lowering Valve Stem Repair Kit (If Valve Stem End gets Broken Or Bent, This Replaces Exposed Part Of Valve)

 7004-06K

 

$79.00 

Delivered

#5B Kit KV-12 Lowering Valve "O" Ring Replacement Kit. Stops Most Leaking Valves. For KV12 Only

7004-06OK

$25.00 

Delivered

 

 

#21 Relief Valve RV-16 S-RV16

$69.00 

Delivered

#4

  3 piece kit Lowering Valve Handle & Plastic Housing Kit (Cap & Body)

7004-05

$88.00 

Delivered

4 B & C 1 Plastic Cap & 1 Body  7004-05 B & C

$79.00 

Delivered

#4B Plastic Body Only 7004-05B

 

$39.00 

Delivered

#4C Plastic Cap for Body 7004-05C

 

$47.00 

Delivered

Four Long Screws For Cap & Body Above S-0404-13

 

$20.00 

Delivered

 

 

#12 New Pump Assembly with Seals & "O" Rings

KP2.5

$125.00 

Delivered

 

 


 

Fenner-Stone or 

Rotary "P400" Series  Power Unit Parts

We're Sorry, we can no longer get parts 

for this obsolete power unit

Click to see new power units

 


 

 

BARNES Power Unit Parts 

#1 New Motor Replacement Motor Not Available  

 Suggestion: Order new power unit at top of page and save some money!

#8 & #9 S7009-10 & S7009-11

Left Bracket & Right Bracket

 

$35.00 Delivered

  S7009-15K

 BARNES Lowering Handle and Mounting Bracket Kit

Complete Handle Repair Kit with L & R Brackets & Handle

 

$58.00 Delivered

 

#23

 

S7009-35

 

Motor / Pump

 Coupler

$39.00 Delivered

#7 S7009-09 Release Valve Assembly  

$198.00 Delivered

 

Tank no longer available - check out power unit at top of page.

NEW POWER UNIT link

 


 

WEAVER STYLE POWER UNITS

Weaver power unit parts available Free Shipping On Parts

Sorry, no parts except the parts listed below are available...

(1) 1086721 #S7601-12 Lowering Valve for AFH-72 $198.00 Delivered

(2) 1088719 #S7601-13 Check Valve for AFH-72 $79.00 Delivered

(3) 1086906 #S7601-16 Lowering Handle $59.00 Delivered

(4) 1086720 #S7601-14 Relief Valve for AFH-72 $159.00 Delivered

(5) 1088466 #S7601-11 Check Valve for AFH-88

$82.00 Delivered

(6) 1088465 #7601-10  Lowering Valve for AFH-88

$159.00 Delivered

(7) 1088467 #S7601-15 Vent Valve for AFH-88 

$89.00 Delivered

Click to see new power units

"DELIVERED" on this website means "NO DELIVERY FEE" 


 

 

Lift Not Lifting As Well Lately?

 

"O" Ring & Seal Kit Revitalizes Your Auto Lift Power Unit 

SPX Fenner Oil Pump

 

 

K-40 Pump Seal Kit

 If your power unit is losing pressure and has difficulty lifting vehicles like it used to, you may need to replace the internal pump seals... worn leaky seals between the pump and valve body inside the power unit tank, allow the oil from the pump to squeeze past and return to the tank instead of filling the hydraulic cylinders. Worn "O" rings between the pump and suction tube allows air into the system and can also cause the pump to lose it's "prime" and take longer to build pressure before it begins to raise the load... Several special seals and "O" rings are included in this pump seal replacement kit. Installing the parts from this kit takes about a half an hour, and even a Monkey could probably do it if you bribe it with a banana or two!  

No oil draining necessary because it just stays in the tank when you lower it.

  Pump "O" ring & seal kit for ALL SPX Fenner Auto Lift Power Units 

 

Sale $25.00 Each Delivered

 

   70065


 

Original SPX Fenner K-40 Seal kit also available!  

"O" Rings "Formed" to correct shape and Shaft Seals Fit like a Glove! 

Sale $35.00 Each Delivered

Original Equipment K-40 Seal Kit 

 


Replacement Power Unit Relocation Bracket

For mounting new style power unit to older Benwil or other brands that had obsolete  power unit at top of column.

 

$44.50 Delivered!

   7010-01


 

 

New FENNER Pump (inside tank)

  KP2.5  with Hi Pressure Seal

  FITS ALL FENNER POWER UNITS

 

Includes bolts & all seals

$125.00 Each Delivered

   


 

Call for Power Unit Parts Information 630-678-9010

 

 


Call for info

  Monarch Power Unit parts

 Call 630-678-9010 

Click to see new power units

 


 

MTE Parts

 Lowering Valve Available 

However, we need the numbers from your tank to find the correct valve for your MTE power unit as there are several types. Call 630-678-9010 with the model number of your pump.

 

Seal Repair Kit

(Pump Shaft & Tank)

 

$49.00 Delivered

10901180

Replacement Pump no longer available

Click to see new power units

 


 

Webster Parts

Parts are expensive and most of the time unavailable, it is probably a better idea to just buy the new power unit at the top of this page. 

Click to see new power units

 

 

Order Online or by Phone, Call 630-678-9010 Between 9AM and 5PM Mon thru Fri 630-678-9010 Between 9AM and 5PM Mon thru Fri

Call 630-678-9010 between 9 AM & 5 PM (Central Time) Mon. thru Fri. NOTE: If you get the "phone lines are busy"

 message, or we are out of the office and you get our answering machine, please be patient and 

leave a message anyway and we'll get back to you ASAP to help you out.

 

 

 

Smitty's Equipment Sales & Service

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 

"Accredited Member of the Better Business Bureau"

 

 

 

Go Back To Top Of Page

All Logos, Names and Trademarks and illustrations throughout this site are the  property of their respective owners.  All the rest Copy write 2012 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated