• Models are available with one or two removable battery packs
• Rechargeable battery pack will operate the light for 6 -10 hours
• An optional carry case is available for mobile users

32 LED light with two rechargeable battery packs
Model:  2300-3201  $98.00 Delivered

32 LED light with two rechargeable battery packs and carry case
Model:  2300-3202

Longer 45 Inch length light to spread light over a larger area.  Model 1225-2500

 $110.00 Delivered 

15 Watt Fluorescent Work Light

(Like above but 22 inch length)

22 Inch length light.

Model 1215-2500

 $75.00 Delivered 

13 watt rough duty fluorescent work light with bright side & end spotlight  

Stubby II, 40ft. Reel, with auto-switch at reel, with in-line ballast. Model 3613-3500

The Stubby II® is a rough duty fluorescent work light with a clear lens at the end to provide light in tight locations. This lamp is a high-intensity 13 watt fluorescent lamp that is rated at 10,000 hours and produces the equivalent light output of a 75 watt incandescent bulb. It has undergone a patented process which makes it 10 times more impact resistant

 $115.00 Delivered 

Stubby II® with X-Treme Shield™

Popular Stubby II® with chemical and scratch resistant outer tube  

Stubby II® with X-Treme Shield™  Our popular Stubby II® with chemical and scratch resistant outer tube
Standard models come with a break resistant polycarbonate outer tube and lens. The X-Treme Shield outer tube is virtually unbreakable, resists shop fluids like brake cleaner, gasoline, oil, bug and tar remover, many industrial solvents and is extremely scratch resistant!

• All Stubby II models come with patented rough service lamp that is 10x more impact resistant than standard lamps
• Soft ring bumpers and lamp cushion provide extra impact protection
• Tool tap is located inline on the cord for user safety
• All Stubby II models provide bright light out the end for tight locations
• On-Off switch under the handle grip is protected from dirt and grease
• Stubby II auto reel meets OSHA requirements of no sparking device such as tool tap or switch that comes within 18" of the floor ( this unit is not explosion proof)
• The X-Treme Shield outer tube assembly is chemical and scratch resistant and is available as s replacement part (P/N 5000-0885)
• Models are available with or without switch, with or without inline tool tap, and SJTOW oil resistant, water tight cord.
• A variety of replacement head kits are available to service your Stubby II or to convert an incandescent light over to a bright, cool operating fluorescent!

13 watt rough duty fluorescent work light with bright LED spotlight  

Stubby II® with LED Spotlight  13 watt rough duty fluorescent work light with bright LED spotlight

• X-Treme Shield™ outer tube is scratch and chemical resistant
• Patented rough service 13-watt fluorescent lamp is rated at 10,000 hours
• Soft durometer end cap, ring bumper, and lamp cushion provide impact protection
• All units come with oil-resistant, weather resistant cord
• Protected switch in handle controls the fluorescent lamp, and the LED spotlight
• Models are available with or without Tool Tap
• Screw-together in line housing allows servicing of electronics
• 20 long life LEDs provide bright spot light out end
  

26 LEDs with SuperBright Technology provide high intensity light in tight areas

• Rotating lamp assembly provides light where you need it
• Cool operating long life LEDs
• Hexagonal shaped handle helps prevent rolling of fixture
• All units come with 18-gauge SVT cord
• Covered on-off switch is protected from dirt and moisture
• 50' reel model comes with wall and ceiling mounting hardware
• A ball stop allows user to set the fixture hang-down height at desired level
• Sliding cord hook included on all models
• Slim profile LED assembly fits into extra tight areas
• LED electronics are located inside the lamp head
• LED lamp assembly is replaceable
• Commercial grade on-off switch is built for long life
• Rubber boot protects on-off switch from dirt and grease
  

   26 LED Light  Compact LED lighting for tight locations
  
  $106.00 Delivered  

   

The Lite, 25ft. cord, with switch, tool tap with ballast in head Model:  2113-2501

    $59.00 Delivered  

 The Lite2™

Twin rough duty 13 watt fluorescent lights provide 1680 lumens of light, while dual hooks give you 2 ways to hang it!

Model 2226-4000 The Lite Reel with 40" cord

• Polycarbonate outer tubes are virtually unbreakable
• Easy Access Re-lamping, simply unscrew the outer tube from the handle to change a lamp
• Removable rotating hook stores completely out of the way
• Clear lenses at end allow maximum light into tight areas
• Cold weather electronic ballast provides reliable starting of lamps down to 20 degrees F

  Length	40'
  With Switch	yes
  With Tooltap	yes
  	Made In USA

  $112.00 Delivered  

   

Adjustable Hood Lite™  

25 watt fluorescent light illuminates the entire engine compartment!

$169.00 Delivered 

 

Equal to a 150 watt light bulb, the 25 watt fluorescent lamp produces 2125 lumens of light, is rated at 20,000 hours and is cool operating. Model 1225-5001

• On-off switch is protected from dirt and grease under the domed end cap
• The Polycarbonate outer tube is virtually unbreakable
• Water/dust tight clamps prevent dirt and moisture from entering the light fixture
• A full-length reflector directs light down to the work surface
• All cords are SJTOW - oil resistant, and water tight
• 120v cold weather rated ballast is located inside the light fixture
• Versatile hanging hooks make the light great for lighting the interior or underbody of a vehicle!
• The Adjustable hanger allows the light to be used on hoods up to a whopping 94 inches wide.
• An impact ring inside the outer tube prevents the lamp from flexing and breaking.
• Adjustable down to 45" wide, the Adjustable Hood Lite can fit even the smallest cars.
• An optional inline Tool Tap 12" from the light fixture brings power right to the job!
• Great for Contractors and Industrial applications as well.
   
  Adjustable Hood Lite™
  25 watt fluorescent light